Degreaser and Cleaner
WR-4 - Citrus Solvent Cleaner
Description:
White Chemical WR-4 is a concentrated hydrocarbon soluble liquid cleaning compound powered by natural occuring orange oil citrus solvent. WR-4 is effective on hard, porous and fibrous surfaces.
Application:
White Chemical WR-4 removes organic petroleum compounds of oil, grease and other hard to remove contaminates. For buildups of oil or grease, use undiluted WR-4. White Chemical WR-4 can be diluted with mineral oil. Alternatives are diesel or varsol, which decreases flash point and compromises environmental safeguards.
WR-5 Non-Hazardous Rig Wash
Description:
White Chemical WR-5 All Purpose Liquid Cleaner is a synthetic concentrated cleaner that does the work of several cleaning products… degreasers, soap powders, and steam cleaning compounds. WR-5 can be used with either salt or fresh water. It is biodegradable, non-hazardous, non-toxic, and will not settle out after mixing with water.
Application:
White Chemical WR-5 can be applied by any normal method while it is especially effective when used with a pressure sprayer. WR-5 concentrate requires a minimum dilution of 10 parts water per 1 part of cleaner. Specific dilutions will be dependent on amount or type of contamination and the method of application. For heavy buildups of oil, grease, and hard to remove contaminants, spray the entire surface with undiluted product and allow to penetrate for approximately 30 minutes before rinsing with water.
WR-11 Solvent Degreaser
Description:
WHITE CHEMICAL WR-11 is a water dispersible solvent formulated to remove the heaviest grease, tar and oil based muds from industrial and oilfield equipment and structures. WR-11 contains rust inhibitor properties for added protection. WR-11 works quickly and effectively where no water based detergent will. After applying WR-11 and allowing to penetrate for several minutes, the contaminating grease and soil can readily be rinsed away with fresh or salt water.
Application:
WHITE CHEMICAL WR-11 For heavier cleaning jobs, apply WR-11 straight by brushing, dipping or spraying. Allow the solvent to penetrate and dissolve the soil, then rinse clean with water or allow to air dry. Heavy accumulations of grease will be more quickly removed by brushing lightly.